Handling By Crane - ABB ZX0 Manual For Installation And Operation

1.4.2

Handling by crane

− The methods of handling by crane differ, depending on
the width of the panel blocks. Up to a block width of 1 m,
there are lugs on the top of the panel modules for fastening
of the suspension ropes (figure 1.4.2.1), and from a width
of 1.2 m upwards there are transport crossbeams with lugs
for fastening of the suspension ropes located at the bottom
(figure 1.4.2.2).
− Attach suspension ropes of a sufficient load bearing capac-
ity (see section 10, Technical data, for the panel weights) to
the lugs with shackles (figure 1.4.2.1). The ABB scope of
supply does not include suspension ropes and shackles.
Fig. 1.4.2.1: Crane handling of a block with width up to 1 m Fig. 1.4.2.2: Crane handling of a block with width of 1.2 m and more
Manual ZX0 HB 600 en - Revision 05 | 11