Cleaning The Sockets, The Contact Tubes And The Outer Cone - ABB ZX0 Manual For Installation And Operation

Cleaning the sockets, the contact tubes and the outer
cone
− Degrease and clean the mating piece for the silicone
insulating part (the busbar socket or socket for the voltage
transformer) with intensive cleaner M.X.T. 60 forte.
− Clean the outer cone on the cable connector with intensive
cleaner M.X.T. 60 forte.
?
Assemble the components immediately to avoid
soiling.
Fig. 2.1.3.1: Greasing the light, outer areas of the silicone insulating part on
the busbar connection
Fig. 2.1.3.2: Greasing the light, outer area of the blanking plug for the bus-
bar bushing in the area between the arrows
Fig. 2.1.3.3: Greasing the silicone insulating part of the voltage transformer
in the area between the arrows
Fig. 2.1.3.4: Greasing the silicone insulating part of the blanking plug for
voltage transformer sockets in the area between the arrows
Manual ZX0 HB 600 en - Revision 05 | 15