Assembly; Iws 65 In Suspended Ceilings - Revox Re:sound I inwall 65 User Manual

IWS 65/ 85
INSTALLATION IWS 65
IWS 65 in a suspended ceiling or recessed in a wall
You use the metal installation frame to
fit the IWS 65 in a suspended ceiling
or recessed into a wall in an elevated,
upright position. For this purpose, you
need to make a 188 x 275 mm
( 7.4 x 10.88 in) cutout using the fitting
template. You must ensure that once
the speaker has been fitted, no dirt
can get onto the speaker unit from
behind. Once the recess is clean, the
speaker cable is connected with the
correct polarity to the IWS 65 - see
also page 10.
fitted speaker:
Revox
Don't forget the sound proofing
material.
installation
frame
1
Step
Step 1 /
3
Attach the speaker unit to the
installation frame loosely with the 6
self-tapping screws supplied and
insert it into the recess at an angle.
Step 2 /
3
Once the unit has been lined up
correctly, the screws should be
screwed fully in. They should only be
hand tight as otherwise the metal
mesh will not fit correctly.
Step 3 /
3
Place the speaker grille in position.
2
Step
Re:sound I
5