Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Revox Re:sound ICS 53
Summary of Contents for Revox Re:sound ICS 53
-
Page 2: Table Of Contents
IWS + ICS Re:sound I Contents INTRODUCTION - Unpacking - General Speaker position - General - Large room installation - Surround speaker Total speaker impedance INSTALLATION - Preparation Suspended ceilings / hollow walls Installation in fitted housing INSTALLATION 8-10 Painting Disassembling Technical hints Technical data... -
Page 3: Introduction
32 mm thick. Your Revox fitted speakers were Suitable fitted housings are available developed based on the latest in from Revox if you want to install in acoustic know-how were solid ceilings or walls. You will find... -
Page 4: Speaker Position
IWS + ICS Re:sound I Speaker position General Large room speaker assignment Here are a couple of tips for you about In the case of large rooms, we lining the speakers up, before you start recommend that distribute installation. speaker several speakers throughout the designed to achieve the optimum room rather than just installing a... -
Page 5: Total Speaker Impedance
Three speakers in parallel full potential is not used. As the impedance is the speaker’s frequency-dependant resistor, Revox recommends that you carry out a test at the threshold of the permitted speaker impedance. -
Page 6: Installation - Preparation
IWS + ICS Re:sound I INSTALLATION - Preparation Installation in suspended ceilings or hollow walls You need to use the supplied fitting Make sure that once the opening has template when doing a standard been cut out, no dirt remains in the installation of the fitted speakers in a installation opening and that any suspended ceiling or wall. -
Page 7: Installation In Fitted Housing
IWS + ICS Re:sound I INSTALLATION - Preparation Installation in the Revox fitted housing - option In the case of a new-build, we Sealing the fitted housing recommend The fitted housing is fixed to the corresponding, watertight fitted boarding with 4 nails at the pre- housing from Revox. - Page 8 Damping with sound proofing material Revox recommends that the fitted housing should be damped, through 250 mm / 9.85 inch the insertion of an even amount of...
-
Page 9: Installation
Under no circum-stances should the speaker flange be twisted. fitted housing: Revox Don’t forget the sound proofing material. Step 4: In the last step the magnetic speaker... - Page 10 IWS + ICS Re:sound I inceiling 52 speaker inceiling 82 speaker...
- Page 11 IWS + ICS Re:sound I inwall 52 speaker inwall 82 speaker...
-
Page 12: Painting
(usually a reliable measure) starts to notice an overload. Your Revox speakers will not be damaged by a short-term overload. -
Page 13: Technical Data
Nominal sound pressure: 88 dB / 2.83V/ 1m 90 dB / 2.83V/ 1m Rec. amplifier power: 20-100 Watt 20-150 Watt In suspended ceilings In Revox fitted housing Dimensions External diameter 202 mm 277 mm Build-in diameter: 164 mm 238 mm... -
Page 14: Guarantee
IWS + ICS Re:sound I Guarantee The guarantee period is 60 months from the date of purchase. Your dealer should be your first contact if you need service. If he can't give you the help you need, send the fitted speaker carriage free and without any accessories to your national Sales... -
Page 15: Disposal Of Your Old Product
IWS + ICS Re:sound I Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means product covered European... - Page 16 IWS + ICS Re:sound I...
- Page 17 IWS + ICS Re:sound I Bedienungsanleitung Re:sound I - ICS 52/82 & IWS 52/82, Art.-Nr.: 10.18.1502...
Need help?
Do you have a question about the Re:sound ICS 53 and is the answer not in the manual?
Questions and answers