Lock Menu; System Lock - Bush LE-55GV350-B1 Instruction Manual

TV systems management
Let's get started
1. Press the MENU button to display the main interface
and then select CHANNEL menu to enter. Use
buttons to select OAD.
2. During normal DTV viewing, if the TV detects an
update to the fimware from the DTV signal, the Over
Air Download screen will appear. Use the
to select either Yes or No.
Note: If you do not press any button within 1 minute, the
Over Air Download screen will disappear. The Over Air
Download screen will appear next time you switch to
viewing a DTV channel.

LOCK MENU

You will have to enter your password or the default
password is 0000 before you can change any of the
settings in the lock menu.
1. Press MENU button to display the main interface, then
use buttons to navigate and select LOCK menu
and press OK button to enter.
2. Press buttons to select the following options and
use buttons to adjust each option's setting.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
TV systems management
42
buttons

System Lock

Select to turn On/Off system lock. The following options
(Channel Lock, Parental Guidance and Key Lock) will only
be accessible when you turn the system lock on.
Set Password
Use the button to select Set Password then press the
OK button. Use the 0 to 9 buttons on the remote control
to enter your password or the default 0000 password.
Press the
the 0 to 9 buttons.Press the
password again using the 0 to 9 buttons.
Your new password has now been saved and the
submenu will close.
button and enter your new password using
button and enter you new