Connections - Bush LE-55GV350-B1 Instruction Manual

Connections

Bringing it all together
Connections
Connector
LAN
Connection
VGA
Connection
PC AUDIO
Connection
SCART
Connection
HDMI
Connection
(Bottom/Side)
Connection
OPTICAL
MINI AV
Connection
MINI YPbPr
MINI YPBPR
Connection
CI
Connection
USB
Connection
Headphone
HEADPHONE
Connection
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
22 Connections
Type Cables
Ethernet
LAN / Ethernet Cable
(Bottom)
VGA
(Bottom)
PC Audio
(Bottom)
PC Audio Cable
Scart
(Bottom)
HDMI
OPTICAL
(Side)
MINI AV
(Side)
MINI AV Cable
(Side)
MINI YPbPr Cable
CI
(Side)
USB
(Side)
(Side)
NOTE: When connecting a device
via the YPbPr or Side AV input,
you must use the connection
Device
cables to enable connection.
See the illustrations on the
left side, you can use HDMI /
OPTICAL/ MINI AV /MINI YPBPR/
CI/USB/ Headphone Socket ports.
/ On the bottom side, you can
use LAN/VAG/PC AUDIO/SCART/
HDMI ports. / You can connect to
HD video sources using the HDMI
port. / You can connect your TV
to other devices such as a camera,
camcorder or games console
with MINI AV port. | Your TV can
be connected to high definition
sources using the component
YPbPr cable. / You can connect
your TV to devices with a SCART
output such as a set top box or
DVD player. | When using the
wall mounting kit (available from
third party in the market, if not
supplied), we recommend that
you plug all your cables into the
back of the TV before mounting
on the wall. | Insert or remove
the CI module only when the TV
is SWITCHED OFF. You should
refer to the module instruction
manual for details of the settings.
| The/Each USB input of your TV
supports devices up to 500mA.
Connecting devices that have
current value above 500mA may
damage your TV. | By connecting
an HDMI cable to your TV, you
have to use only a shielded HDMI
cable to guarantee a sufficient
immunity against parasitic
frequency radiation.
If you want to connect a device
to the TV, make sure that both the
TV and the device are turned off
before making any connection.
After the connection is done, you
can turn on the units and use
them.
Note: ARC is supported only via
the HDMI2 input.