Table of Contents
Advertisement
TV systems management
Let's get started
CHANNEL MENU
This menu allows you to retune, edit your channel list,
check your signal information, check your recorded and
schedule lists and update your TV's software using the
over air download system.
Note: The menu shown in the diagram has been
extended to show all available options. You will need to
use the
buttons to scroll thought the menu to view
all of the options.
1. Press MENU button to display the main interface, then
use
buttons to navigate and select CHANNEL
menu and press OK button to enter.
2. Press
buttons to select the following options and
use
buttons to adjust each option's setting.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
TV systems management
38
Auto Tuning
1. Select the Auto Tuning submenu and press the OK
button to confirm.
2. Use the
buttons to select the tuning type among
DTV+ATV/Digital TV/Analogue TV.
Use the
buttons to select the Country you are
tuning the TV in.
3. Press the
button and select Auto Tuning and press
or OK button to start the tuning process.
the
4. Once the tuning has finished you can set the Country,
Region and Secondary Region using the
confirm your selections by pressing the OK button.
Once you have completed all of the settings the menu
will close automatically.
buttons,
Advertisement
Table of Contents
