Table of Contents
Advertisement
TV systems management
Let's get started
Channel Edit
Allows you to edit TV channel information in the Channel
List.
1. Press the MENU button to display the main interface
and then select CHANNEL menu to enter the Channel
Edit.
2. Press the
button to select Channel Edit and
press the OK button on the remote control to open
the submenu.
Delete: Highlight the channel you want to delete using
the
buttons. Press the RED button on the remote
control to delete the programme from the EPG menu.
Rename: Use the
buttons to highlight the channel
you
want to rename in the EPG menu and press the GREEN
button on the remote control to rename.(only available in
ATV mode)
Move: Use the
buttons to highlight the channel you
want to move in the EPG menu and press the YELLOW
button on the remote control. Move the channel to the
position you want it in and press the yellow button again.
Skip: Use the
buttons to highlight the channel you
want to skip in the EPG menu and press the BLUE button
on the remote control.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
TV systems management
40
Fav: Select the channels you want to add to your
favourites list using the
button on the remote control to confirm.
Signal Information
Allows you to view the signal strength of the selected
channel TV signals.
CI (Common Interface)
Digital TV channels only
This function allows you to view the common interface
module information.
Important: Do not keep removing and Resetting the
Common Access Module as it could damage the
interface and cause a malfunction.
buttons then press the FAV
Advertisement
Table of Contents
