Setting Date And Time; Setting Language; Viewing Software Version Number - Welch Allyn Hillrom H12+ User Manual

Setting Date and Time

DATE/TIME is used to set the current date and time and to set an alternative format for the displayed
date.
From the configuration menu, scroll to DATE/TIME, press Enter. The DATE/TIME menu includes the
following options:

SET MINUTE

SET HOUR

SET DAY

SET MONTH

SET YEAR

FORMAT

DONE
Scroll to the desired option, press Enter. The current values for this option are displayed on the LCD
screen.
When setting the date or time, increase the value by pressing Up/Right. To decrease the value, press
Down. When the correct value is displayed on the screen, press Enter.
NOTE: A SET SECONDS option does not exist because seconds are reset each time a value is
changed. If you want to reset the seconds, set the minutes first. Press Enter at the instant you
want the seconds to be reset.
FORMAT provides two options for the date format: month/day/year or day.month.year.
From the DATE/TIME menu, scroll to FORMAT, press Enter. Scroll from one option to the other; press
Enter to select the desired date format and return to FORMAT menu. Scroll to DONE, press Enter.
To return to the CONFIGURE menu, scroll to DONE, press Enter.

Setting Language

LANGUAGE is used to select a language to view the main and sub-menu options.
From the CONFIGURE menu, scroll to LANGUAGE, press Enter. Scroll through the language options;
press the Enter key to select the desired language and return to the LANGUAGE menu. Scroll to DONE,
press Enter.

Viewing Software Version Number

VERSION displays the current software version installed on the H12+ recorder.
From the CONFIGURE menu, scroll to VERSION using Up/Right or Down; press Enter to view software
version. Press Enter to return to VERSION, scroll to DONE, and press Enter to return to CONFIGURE
menu.
CONFIGURING THE RECORDER
37