Set Date, Time And Beeper Functions - Microlife FR1MF1 Instruction Manual

mode icon (body or object) will be displayed.
• Measurement complete AL : The reading will be shown on
the display 3 with the «° C »or«° F » icon and the mode icon
steady.
The unit is ready for the next measurement as soon as the
«°C» or «°F» icon is flashing again.
• Low battery indicator AO : When the unit is turned on, the
triangle icon will keep flashing to remind the user to replace the
battery.

5. Set Date, Time and Beeper Functions

• After the new batteries are fitted, the year number flashes in
the display BP. You can set the year by pressing the START
button 4.To confirm and then set the month, press the M button
8.
• Press the START button 4 to set the month. Press the M
button 8 to confirm and then set the day.
FR1MF1
• Follow the instructions above to set the day, 12 or 24 hours
System mode, hours and minutes.
• Once you have set the minutes and pressed the M button 8 ,
the date and time are set and the time is displayed.
• If you want to change the date and time, press and hold the
M button 8 down for approx. 3 seconds until the year number
starts to flashBP. Now you can enter the new values as
described above.
• Clicking the ON/OFF button 5 during time setup(after battery
insertion) will remove the device from time setting Mode, the
LCD will show Date/ TIME icons respectively with "--:--"After
that press the ON/OFF button 5 to start the test or if no further
action is taken within 20 seconds, the device will automatically
turn off.
• When the device is switched off, press and hold the ON/OFF
button 5 for 5 seconds to set the beeper BQ. Press the ON/
OFF button5to turn the beeper on and off. The thermometer
EN
6