8.3. Deleting the «my» favourite light intensity 8 1. INTRODUCTION The Lighting receiver Variation io is a receiver equipped with io Radio Technology. It can be used to control all types of light via a power supply (AC/DC) with 1-10V control (halogen lights, LEDs) from a Somfy io local control point.
3. COMPATIBILITY The Lighting receiver Variation io is only compatible with power supplies (AC/DC) with 1-10V control. Connect a single power supply (AC/DC) with 1-10V control for each Lighting receiver Variation io. Electronic step down voltage converter Max : 500W 4.
30 cm Cable length 50 cm 6. SET-UP This guide describes set-up using only a Situo io type Somfy io local control point. To perform set-up using a different io control point, refer to the corresponding instructions. «my» light Light on...
8.4. Replacing a lost or broken Somfy io control point Adding a control point from a programmed control point section 8.1 If there is no longer a control point in the lighting receiver, go to section 8.5 5HVWRULQJ WKH RULJLQDO FRQ¿JXUDWLRQ This reset is done with a Somfy io local control point.
Replace them with batteries with identical The batteries in the control point are low. VSHFL¿FDWLRQV The control point is not programmed in the Follow the procedure for adding a Somfy io local Lighting receiver Variation io. control point. The control point used is not compatible Check that the control point is an io control point.
Need help?
Do you have a question about the Lighting receiver and is the answer not in the manual?
Questions and answers