1. Introduction The Lighting Slim Receiver RTS is a receiver ¿ tted with Radio Technology Somfy RTS. It enables lighting to be controlled (all types of bulbs - up to a maximum of 500 W) from an RT or RTS type control point.
- Make a loop in the Lighting Slim Receiver RTS's power supply cable to prevent water ingress. - The building in which the product is used may reduce the radio range.
Press the PROG button on the programmed control PROG. PROG. point (a) until the light comes on then goes out: the Lighting Slim Receiver RTS will be in it's program- ming mode for 2 minutes. 2 min. BrieÀ y press the PROG button on the RTS control point (b) to be added/deleted: the light comes on then goes out;...
Press the PROG button on the programmed control point (a) until the light comes on then goes out: the Lighting Slim Receiver RTS will be in it's program- ming mode for 2 minutes. BrieÀ y press the PROG button on the RTS control point (b) to be added: the light comes on then goes PROG.
Installation guide Lighting Slim Receiver RTS 7. Tips and recommendations 7.1 Problems with the Lighting Slim Receiver RTS? Problem Possible cause Solution The light does not react The bulb is blown. Replace the bulb. when a button on the control point is pressed...
Need help?
Do you have a question about the Lighting Slim Receiver RTS and is the answer not in the manual?
Questions and answers