Step 5. Verify Operation - Keysight Technologies M9036A Startup Manual

Pxie embedded controller

Hide thumbs Also See for M9036A:

Table of Contents

Step 5. Verify Operation

There are no actual verification procedures for the M9036A Embedded

Controller. If it boots properly and the front panel status LEDs do not indicate an

error (see

working normally.

Note that you can use the Soft Front Panel (SFP) software to monitor and control

the triggering and the M9018A chassis function. To start the SFP programs, Click

the Windows Start button > All Programs > Keysight. Then select either the

M9018A or the M9036A. See the following screen capture.

Keysight M9036A Embedded Controller Startup Guide

"Front panel LED indicators"

on page 11), then the controller is

Table of Contents