Safety Instructions - Fujitsu PRIMERGY BX620 S6 Service Supplement Manual

3

Safety instructions

I
The following safety instructions are also provided in the manual "Safety
Notes and Regulations".
This device complies with the relevant safety regulations for data processing
equipment.
V
CAUTION!
The actions described in this manual should only be performed by
service personnel.
Before starting up
V
CAUTION!
During installation and before operating the device, observe the
instructions on environmental conditions for your device.
If the device is brought in from a cold environment, condensation may
form both inside and on the outside of the device.
Wait until the device has acclimatized to room temperature and is
absolutely dry before starting it up. Material damage may be caused
to the device if this requirement is not observed.
Transport the device only in the original packaging or in packaging
that protects it from knocks and jolts.
Installation and operation
V
CAUTION!
Observe the notes on installation and operation in the operating
manual of your respective basic unit.
When installing the server blade in the basic unit, beware of the
energy hazard at the midplane contacts. A short circuit on these
contacts can damage the system.
Data cables must be adequately shielded to avoid interference.
BX620 S6
Service Supplement 13