Fujitsu PRIMERGY BX620 S6 Service Supplement Manual page 34

Replacing the TPM
Figure 17: Installing the TPM
Ê Plug the new TPM onto the system board (1).
Ê Attach the TPM with the TPM screw (2).
I
Tighten the screw with a torque of 0.6 Nm.
Ê Install the system board and the components you have removed as
described in section "Installing/removing the system board" on page
Ê Close the server blade, reinsert it in the system unit and switch it on as
described in section "Preparation" on page
34
17.
Service Supplement
30.
BX620 S6