Procedure - Fujitsu PRIMERGY BX620 S6 Service Supplement Manual

2

Procedure

V
CAUTION!
The actions described in this manual should only be performed by
service personnel.
Ê First of all please familiarize yourself with the safety instructions in the
chapter "Safety instructions" on page
Ê Make sure that all the manuals you need (see service DVD) are available,
printing out the PDF files if necessary. You will definitely need the operating
manual for the basic unit.
Ê Shut down the server blade correctly, switch it off and remove it from the
basic unit as described in the
Ê Replace the defective component as described in the relevant chapter.
Ê Close the server blade.
Ê Install the server blade into the system unit.
Ê Start the operating system.
Ê If necessary, configure the server blade as required.
1
These procedures are described in the Operating Manual.
BX620 S6
13.
chapter "Replacing components" on page
1
Service Supplement
11
1
17.
11