Replacing the control panel board
Removing the control panel board
Figure 6: Pulling off the foil cable
Ê Loosen the clamping bracket (see arrow) and disconnect the foil cable of the
control panel board from the connector on the system board.
1
Figure 7: Unfastening the control panel board
Ê Undo the screw (1) and pull the control panel module out of the bay (2).
Ê Remove the control panel board from the server blade chassis.
Installing the control panel board
To install the control panel board, follow the removal instructions in reverse
order.
22
Service Supplement
BX620 S6