Fujitsu PRIMERGY BX620 S6 Service Supplement Manual page 33

Turn the TPM screw (see photo) with a fine
screwdriver (e.g. watchmaker's screwdriver).
V
CAUTION!
To undo the TPM screw, you must
turn it to the right!
If you turn it to the left, you may tear
the thin metal bar and may not be
able to remove the screw at all.
Ê Remove the defective TPM on the top.
Figure 16: Assembling the TPM bit insert
Ê Insert the TPM bit that is supplied with the S26361-F3552-L1 installation kit
in a bit screwdriver.
BX620 S6
Service Supplement
Replacing the TPM
33