General Guidelines • A video to help guide the installation is available on the MobileDemand website - technical support section. • Install the QW ERTY keyboard in a non-obstructive, safe location within the vehicle cab. • Avoid obstructing the following: •...
Page 3
Attaching the QWERTY Keyboard The QW ERTY keyboard is attachable directly to the xTablet T7000 unit using a coin or a flat-blade screwdriver. Tools Required • Phillips screwdriver To attach the keyboard to the xTablet T7000 1. Align the screws on the top of the QW ERTY keyboard ……with the holes in the bottom of the xTablet T7000.
Page 4
2. Place the bottom of the xTablet T7000 into cradle seat. 3. Push the top of the xTablet T7000 into the cradle latch top until it clicks in place – this secures the top cradle latch onto the xTablet T7000.
Page 5
To remove the standard communications module • With the xTablet T7000 dock face down, use a Phillips screwdriver to remove the eight screws from the back and bottom of the communications module, then detach the communications module from the xTablet T7000 dock.
Page 6
CNTRL KEYS LEFT SIDE of KEYBOARD Section of KEYBOARD RIGHT SIDE of KEYBOARD To activate the Red keys, press the red Fn key along with the key that the Red key is assigned to. To activate the White keys, press the white Up Arrow key along with the key that the white key is assigned to. To press a keyboard Function Key like F1 for help, simply press the F1 key located in the top middle section.
Page 7
Some key tips: To turn on CAPS LOCK, Press the Fn Key and press the Q key. For BACKSPACE, Press this key at the top right of the keyboard. For ENTER, Press this key on the right side of the keyboard. For typing a CAPITAL letter, Press this key in the bottom middle of the keyboard.