IMPORTANT . Please note that standard RS485-to-USB converter and M12 Male-Female cable are required for connecting and operating the Terabee IND-TOF-1 sensor with a PC. Please ...
● Terabee IND-TOF-1 distance sensor ● Straight M12 5-pin A-coded cable of your preference ( n ot provided by Terabee ) ● RS485-to-USB adapter ( n ot provided by Terabee ) ● USB cable with Type B connector ( n ot provided by Terabee ) ...
Page 5
(capable to provide 24V supply). Table 3 - Wiring connection between IND-TOF-1 and Power supply M12 cable Power supply +24V (pin 1) Pin x GND (pin 2) Pin y Step 4 ...
2.2. Software setup As the Terabee IND-TOF-1 sensor uses the MODBUS RTU protocol for data communication via RS485 interface, for operation on PC we recommend to work with ...
Figure 4. Status after pressing “Connection” 2.3. Basic sensor parameter configuration To learn more about IND-TOF-1 operating modes and their setup and functionality, ...
“Request OK (1/1)”. Figure 5. Read distance data command execution example 2.3.2. Switching between operating modes Terabee IND-TOF-1 provides users with 6 operating modes (learn more about each ...
Need help?
Do you have a question about the IND-TOF-1 and is the answer not in the manual?
Questions and answers