Cocraft LXC MTG18 Original Instructions Manual page 8

Instructions for use
The wheel attachment is intended for use with the grass shears and not
the shrub shears. The shrub shears can be mounted on the telescopic pole
to increase your reach without the wheels.
Assembly
Fitting the wheels to the grass shears
1. If you push the wheels slightly apart fitting is easier. Insert the pins on the wheel
bracket into the slots on the grass shears. Slide the wheels on until they reach
the lugs on the grass shears and click into place.
2. Slide the handle with the attached
grass or shrub shears into the bracket
(6) making sure that it clicks securely
into place.
3. Slide the battery into the battery
connection (3) making sure that it
clicks securely into place.
4. Turn the locking knob for adjusting
the length of the telescopic pole (4)
clockwise and pull out the pole to
the desired length. Tighten the locking
knob to lock.
5. Slide the trigger safety switch (1)
forwards and press the power trigger
(2). The grass/shrub shears will start.
6. The grass/shrub shears will stop
automatically when the power trigger
is released.
8