Configuring the Front Button or Footswitch
General instructions
Both the Leica DMS300's front button and
footswitch can be configured with the remote
control as defined by the user.
The default setting is "CAPTURE" for
capturing an image.
The Leica DMS300's front button and
footswitch do not work in PC mode.
Leica DMS300 User Manual
Configuring
1. Point the remote control towards the
Leica DMS300.
2. Press the button
to show the user menu
on the computer monitor.
3. Select "SETUP USER" in the main menu:
Startup Procedure
4. Select "FRONT BUTTON" for the front button
or "FOOT SWITCH" for the footswitch:
42