Installing The Leica Ring Light - Leica DMS300 User Manual

Installing the Leica Ring Light

Assembly of the Leica ring light illuminator
2
1
1. Connect the external power supply unit to
the Leica ring light illuminator.
2. Attach the Leica ring light illuminator to the
objective from below.
3. Tighten the locking screw.
Leica DMS300 User Manual
3
Ensure that the locking screw of the
illuminator and the locking screw of the
optics carrier are on a straight line.
Assembly
Connect the power supply to the power cable.
23