Sn310 Model - Stormshield SN Series Product Presentation And Installation

SN310 model

The SN310 firewall is fanless. The product comes with an external power adapter.
LEDs Front panel:
This model has its LEDs on the front panel as shown below:
Connectors
The connectors on the SN310 model are located on the front and rear panels.
1
This is the slot for the SD card*.
2
Plugging in the mains adapter automatically starts this product.
3
The USB port allows accessing the product in console mode**; it is possible to connect the
Firewall directly from a computer. The default baud rate on these models is 115 200 baud
(8N1).
4
The USB 3.0 port can be used for secure configurations or upgrades. You can also plug a USB
key or an approved USB modem into it.
5
The USB 2.0 port can be used for secure configurations or upgrades. You can also plug a USB
key or an approved USB modem into it.
The SN310 model offers 8 1GbE ports:
6
The first zone is the EXTERNAL (OUT) interface, in external mode by default. It makes up the
zone that is needed for connecting to the internet.
7
The second zone is the INTERNAL (IN) interface.
8
This is the button for resetting the appliance to its factory settings (defaultconfig).
* The recommended type of SD card is at least Class 10 (C10) UHS Class 1 (U1) or App Performance 1
(A1),SDHC standard. The memory card must be in a full-size physical SD format, in SDHC or SDXC standard.
Only adapters provided with the card must be used. The maximum memory size supported is 2 TB.
Stormshield recommends the use of high-endurance/industrial cards or preferably, those that have a
built-in MLC flash chip developed by major brands (e.g., SanDisk, Western Digital, Innodisk, Transcend,
etc.) and with at least 32 GB of memory.
** This connection in console mode requires the installation of a driver. Depending on your operating
system, you can download a driver from:
Page 27/66
SNS - PRODUCT PRESENTATION AND INSTALLATION 2019
http://www.ftdichip.com/Drivers/VCP.htm
sns-en-SNrange_installation_guide-2019 - 09/2019
PRESENTATION OF SN MODELS
1
Online LED (green)
2Status LED (green)
3
Power LED (yellow)
1
OUT Interface
2
INInterface