Shutting Down - Stormshield SN Series Product Presentation And Installation

Shutting down

SN160, SN160W, SN210, SN210W, and SN310
Log on to the configuration interface. Go to the Maintenance module (System menu) and click on
"Shut down the Firewall". Then wait for several minutes until the Online and Status LEDs go out.
For this model, the LEDs shut off in the following order:
1
Online
The Power LED will stay lit if the product is powered up.
SN510 and SN710
Log on to the configuration interface. Go to the Maintenance module (System menu) and click on
"Shut down the Firewall". Wait a few minutes for all 3 LEDs – Online, Status and Power to go off.
For these models, upon shutdown, the LEDs shut off in the following order:
1
Online
A beep will indicate that the appliance is in the process of shutting down.
SN910
Log on to the configuration interface. Go to the Maintenance module (System menu) and click on
"Shut down the Firewall".
A beep will indicate that the appliance is in the process of shutting down. Wait for several minutes
until the Power LED goes out.
SN2100 and SN3100
To shut down your Firewall, press once on the Power button located on the rear panel. Wait a few
minutes for all 3 LEDs – Online, Status and Power to go off.
For these models, upon shutdown, the LEDs shut off in the following order:
1
Online
A beep will indicate that the appliance is in the process of shutting down.
SN6100
To shut down your Firewall, press once on the Power button located on the rear panel. Wait a few
minutes for the 2 LEDs (Run and Power) to go off. For this model, the LEDs shut off in the following
order:
1
Run
A beep will indicate that the appliance is in the process of shutting down.
SNi40
Log on to the configuration interface. Go to the Maintenance module (System menu) and click on
"Shut down the Firewall". Wait a few minutes for the 2 LEDs (Run and Power) to go off. For this
model, the LEDs shut off in the following order:
1
Run
Page 51/66
2
=> Status
2 3
+ Status => Power
2 3
+ Status => Power
2
=> Power
2
=> Power
SNS - PRODUCT PRESENTATION AND INSTALLATION 2019
INITIAL CONNECTION TO THE PRODUCT
sns-en-SNrange_installation_guide-2019 - 09/2019