Table of Contents
Advertisement
APPENDIX B: LOG STORAGE
For models equipped with a hard disk or SSD, the log storage service is enabled by default,
except on SNi4O models. To enable it, please refer to the section Enable log storage below.
On SN160, SN160W, SN210, SN210W and SN310 models, you can subscribe to the External
storage option allowing you to store logs externally on an SD card.
External storage option - storing logs externally on an SD card
Storing logs on an external medium can only be done on an SD card. This service is not
compatible with other media such as a USB key or an external hard disk.
The recommended type of SD card is at least Class 10 (C10) UHS Class 1 (U1) or App Performance
1 (A1),SDHC standard. The memory card must be in a full-size physical SD format, in SDHC or
SDXC standard. Only adapters provided with the card must be used. The maximum memory size
supported is 2 TB.
Stormshield recommends the use of high-endurance/industrial cards or preferably, those that
have a built-in MLC flash chip developed by major brands (e.g., SanDisk, Western Digital,
Innodisk, Transcend, etc.) and with at least 32 GB of memory.
Insert the SD card, as described in the diagram to
the right, with the connector facing downwards.
When you insert the SD card for the first time, the
Hardware component (widget) on the Dashboard
will display the following information:
You will then need to enable and format the SD card - please refer to the following section.
Enable log storage
To enable the service, go to the Notifications menu, then to the Logs – Syslog module. In the
Local storage tab, select the Enable log storage option.
Page 57/66
NOTE
SNS - PRODUCT PRESENTATION AND INSTALLATION 2019
sns-en-SNrange_installation_guide-2019 - 09/2019
APPENDIX B: LOG STORAGE
Hide quick links:
Advertisement
Table of Contents
