Table of Contents
Advertisement
Please note!
•
To prepare a number of cappuccinos and milk based cof-
fees, clean the milk container after you have prepared
the last beverage only. To proceed with making the next
beverages, when the "CLEAN message is displayed, press
"
".
•
If you do not clean the milk container, the
pears on the display to remind you that it needs cleaning.
•
The milk container can be kept in the refrigerator.
•
In some cases, to clean you must wait for the appliance to
heat up.
11. TEA FUNCTION
Important! Danger of burns.
Do not leave the appliance unattended while hot water is being
delivered.
1. Make sure the hot water/steam spout (C6) is attached cor-
rectly to the hot water/steam connection nozzle (A9);
2. Put a tea bag in the cup, then place the cup under the spout
(as close as possible to avoid splashes);
3. Select "
TEA FUNCTION" from the homepage;
4. "HOT WATER FOR"; select:
- the required quantity of water by pressing
24);
- the required water temperature by pressing one of the
proposed teas; each tea (white, green, oolong or black)
corresponds to a specific water temperature (fig. 25);
5. Once the beverage is selected, the corresponding image
appears on the display (B), together with a progress bar
which fills gradually as preparation proceeds;
6. The machine delivers the chosen quantity of hot water,
then delivery stops automatically. To stop delivery manu-
ally, press "
Please note!
•
If "Energy Saving" mode is active, you may have to wait a
few seconds before the hot water is delivered.
•
The quantity of water in the cup can be customised (see
sections "16. Customising the beverages " and "17. Memo-
rising your personal profile").
•
Delivery can be stopped at any moment by pressing "
";
•
As soon as delivery has ended, to increase the quantity of
water in the cup, just press "
quantity is reached, press "
symbol ap-
".
EXTRA". When the required
".
12. DELIVERING HOT WATER
Important! Danger of burns.
Do not leave the appliance unattended while hot water is being
delivered.
1. Make sure the hot water/steam spout (C6) is attached cor-
rectly to the hot water/steam connection nozzle (A9);
2. Place a container under the spout (as close as possible to
avoid splashes);
3. Select "
sponding image appears on the display (B), together with a
progress bar which fills gradually as preparation proceeds;
4. The machine delivers hot water, then delivery stops auto-
matically. To interrupt hot water delivery manually, press
"
Please note!
•
If "Energy Saving" mode is active, you may have to wait a
few seconds before the hot water is delivered.
•
Preparation of hot water can be customised (see sections
"16. Customising the beverages " and "17. Memorising
your personal profile").
13. STEAM DELIVERY
(fig.
Important! Danger of burns.
Do not leave the appliance unattended while steam is being
delivered.
1. Make sure the hot water/steam spout (C6) is attached cor-
rectly to the hot water/steam connection nozzle (A9);
2. Fill a container with the liquid to be heated or frothed and
immerse the hot water/steam spout in the liquid;
3. Select "
sponding image appears on the display (B), together with
a progress bar which fills gradually as preparation proceeds
and after a few seconds, steam to heat the liquid is deliv-
ered from the hot water/steam spout;
4. When the required temperature or level of froth is reached,
interrupt steam delivery by pressing "
Important!
Always stop steam delivery before extracting the container con-
taining the liquid to avoid burns from splashes.
Please note!
If "Energy saving" is active, you may have to wait a few seconds
before steam is delivered.
17
HOT WATER" from the homepage. The corre-
".
STEAM" from the homepage. The corre-
";
Advertisement
Table of Contents
Troubleshooting
