Advertisement
Quick Links
Installation Instructions
V1.0
PSLT3
Thank you for choosing our product! We strive to provide the best
quality and services for our customers. Would you kindly share your
experience on Amazon if you are satisfied? Should you have any
issues, please don't hesitate to contact us.
Telephone：
800-5566-806 Mon-Fri 10am - 6pm (PST) (USA) (CAN)
Email：
supportus@perlesmith.com (US/CA/DE/UK/FR/IT/ES/JP/AU)
Advertisement
Related Manuals for Perlesmith PSLT3
Summary of Contents for Perlesmith PSLT3
- Page 1 Installation Instructions V1.0 PSLT3 Thank you for choosing our product! We strive to provide the best quality and services for our customers. Would you kindly share your experience on Amazon if you are satisfied? Should you have any issues, please don't hesitate to contact us.
-
Page 2: Important Safety Information
We hereby disclaim any liability for injury or damage arising from incorrect assembly, incorrect mounting, or incorrect use of this product. •DO NOT INSTALL INTO DRYWALL ALONE. •Please check www.perlesmith.com for more products and company information. Tools Needed (Not lncluded) Stud Finder... -
Page 3: Supplied Hardware
Supplied Hardware Hardware for Attaching Wall Plate to Wall Lag Bolts Washers Wall M8X65 Anchor CAUTION! These anchors are for concrete or brick walls ONLY. DO NOT use them in drywall or wood studs. Hardware for Attaching TV Bracket to TV Spacers Spacers Spacer with... - Page 4 Step 1 Measure VESA and Check TV screws Measure the distance between the holes located at the back of your TV (these measures may form the shape of a square, or a rectangle) and check that these taken measurements are within the VESA(*) range for this wall mount.(*) VESA: International standard established by the TV manufacturers used to determine if LCD/LED TVs are compatble with wall mounts.
- Page 5 For Flat TV with Inset Holes or Cable Interference or Rounded TV D2/E2/E3 C1/C2 Manual Only! First, make sure the diameter of the bolt(D1-E3) fits your TV. Then, please see the diagram above. You will need to thread the bolt into the TV using the washer (B) and spacer (C1 or C2) if necessary with a screwdriver(Not included).
- Page 6 Manual Only! Attach Wall Plate to Wall Step 4 For wood stud installation, follow STEP 4A For concrete installation, follow STEP 4B Wood Stud Option Step WARNING: Avoid potential personal injury or property damage! DO NOT over-tighten the lag bolts [A1]. Tighten the lag bolts [A1] only until the washers [A2] are pulled firmly against the wall plate.
- Page 7 4A-1 Use a stud finder(not included) to locate wood studs. Mark the edge and center locations. 4A-2 Position the template at your desired height and line up the holes with your stud center line. Level the template and mark the holes.
- Page 8 4A-4 Install the wall plate using lag bolts [A1] and washer [A2]. Tighten the lag bolts [A1] only until the washers [A2] are pulled firmly against the wall plate. Solid Concrete or Concrete Block Option Step 4B WARNING: Avoid potential personal injury or property damage! DO NOT over-tighten the lag bolts [A1].
- Page 9 4B-1 4B-2 Drill 4 pilot holes using a 10mm diameter drill bit. Make sure the depth is not less than 70mm Never Position the template at your desired drill into the mortar between blocks. height, level the template and mark the pilot hole locations.
- Page 10 Hang Your TV to the Wall Plate Step 5 HEAVY! You may need assistance with this step. Adjustment 1 Level...
-
Page 11: Tilt Angle Adjustment
Tilt Angle Adjustment Adjustment 2 Your TV should adjust easily when moved, then stay in place. If your TV is too loose or too tight, adjust side tension knob [T] . NOTE: Once your TV is in place, tighten the side tension knob [T] to prevent unwanted movement. - Page 12 Would you kindly share your experience on Amazon if you are satisfied? Should you have any issues, please don't hesitate to contact us. Telephone： 800-5566-806 Mon-Fri 10am - 6pm (PST) (USA) (CAN) Email： supportus@perlesmith.com (US/CA/DE/UK/FR/IT/ES/JP/AU)