Advertisement
Quick Links
Full Motion Mount Instruction
Website:
www.perlesmith.com
Manual
Model: PSLF7
Thank you for choosing this Perlesmith product! At Perlesmith we strive
to provide you with the best quality products and services in the industry.
Please share your experience of our product with others at
www.perlesmith.com/pages/reviews if you are satisfied. Should you have
any issues, please don't hesitate to contact us.
Technical Support:
1-800-556-6806 Mon-Fri 10am - 5pm (PST) (USA) (CAN)
Other Info:
supportus@perlesmith.com (US/CA/DE/UK/FR/IT/ES/AU)
V1.0
Advertisement
Related Manuals for Perlesmith PSLF7
Summary of Contents for Perlesmith PSLF7
- Page 1 Manual V1.0 Model: PSLF7 Thank you for choosing this Perlesmith product! At Perlesmith we strive to provide you with the best quality products and services in the industry. Please share your experience of our product with others at www.perlesmith.com/pages/reviews if you are satisfied. Should you have any issues, please don't hesitate to contact us.
-
Page 2: Important Safety Information
200mm/8 in.(W)x100mm/4 in.(H) If your TV VESA is greater than 600x400 mm/24x16 in. or less than VESA 200x100mm/8x4in., this mount is NOT compatible. If this mount is NOT compatible, please contact customer service at supportus@perlesmith.com to find a compatible mount. - Page 3 Before starting assembly, verify all parts are included and undamaged. Do not use damaged or defective parts. lf you require replacement parts, contact our Product Support line at 1-800-556-6806 or customer service at supportus@perlesmith.com. • Please note: Not all hardware included in this package will be used.
- Page 4 Note: The bolts are shown in accordance with the actual size TV Bolts [Only one bolt size fits your TV] M6 x 15mm M6 x 35mm [D1] [D2] M8 x 25mm M8 x 35mm [E1] [E2] TV Bracket M8 x 50mm [E3] Supplied Parts and Hardware for Step 2 Front Support...
- Page 5 -Too short will not hold the TV. -Too long will damage the TV. Correct Too Short Too Long Correct Note: If necessary, the spacers can be used in multi-layer. If the installation fails after trying various methods, please contact customer service at supportus@perlesmith.com.
- Page 6 CAUTION: Ensure the TV Bracket [04] is EQUALLY CENTERED on your TV AND securely fastened in place. Option A (For Flat Back TV) D1/E1 Alternate Setups Spacer C1C2 (If needed) Option B (For Round Back TV) D2/E2/E3 Alternate Spacer Setups C1/C2/C3 Option C (For TV with A “Bump”) Spacers may be necessary for 2 holes ONLY.
- Page 7 Option D For cable interference or inset holes, use spacers to create extra space between the TV and TV brackets C1/C2/C3 D2/E2/E3 Alternate Spacer Setups Secure Front Support Assembly to the Arm Assemble/Wall Step 2 Plate 2-1 Remove the 4 pcs pre-assembed bolts [B3] from front support [01] and keep the bolts [B3] for the use in 2-2, then slightly loosen the 4 pcs preassembled bolts [B4] 2-2 Insert the arm extensions [03] into the front support [01].
- Page 8 2-3 Secure the front support assembly to arm assembly/wall plate Step 3 Attach the Arm Assembly/Wall Plate [05] to Wall For wood stud installation, follow STEP 3A For concrete installation, follow STEP 3B Step 3A Wood Stud Option WARNING: ● Avoid potential personal injury or property damage! DO NOT over-tighten the lag screws [A1].
- Page 9 2 9/16 in.(65mm) 3A-3 7/32 in.(ø5.5mm) Drill 4 pilot holes using a 7/32 in.(5.5mm) diameter drill bit. Make sure the depth is not less than 2 9/16 in.(65mm). 3A-4 HEAVY! You may need assistance with this step. 33/64 in.(13mm) Socket Wrench Install the arm assembly/wall plate [05] using lag screws [A1] and washers [A2].
- Page 10 2 3/4 in.(70mm) 3B-2 3/8 in.(ø10mm) Drill 4 pilot holes using a 3/8 in.(10mm)diameter drill bit. Make sure the depth is not less than 2 3/4 in.(70mm). Never drill into the mortar between blocks. 3B-3 HEAVY! You may need 1/2 in.(13mm) assistance with this step.
-
Page 11: Level Adjustment
Level Adjustment If needed, the TV can be levelled Note: Please do not over-tighten or over-loosen the bolts 1. Loosen the four bolts [B1]. 2. Level your TV. 3. Retighten four bolts [B1] to hold TV in place. Tilt Adjustment 1. - Page 12 Thank you again choosing this Perlesmith product! All of us at Perlesmith do appreciate your product purchase. We hope that you are as happy with your product as we are designing and manufacturing it for you. We strive to provide you with the best quality products and services in the industry.