Table of Contents
Advertisement
Operation and Maintenance Instructions
Functions of Operating Elements / Indicators (Fig. 5)
I
ON/OFF button
J
Boiler temperature indicator
K
Tank temperature indicator
Starting the Appliance
Before switching the appliance on make sure that the following conditions are met:
– the main switch is off;
– water shut-off valve is open;
– water supply is ensured;
– all filters are installed in their respective locations;
– overflow is in the right location;
– device door is closed;
– ON/OFF button must be pressed for 1.5 sec.
Filling and Heating Process
Filling process begins after starting the appliance. First the rinsing boiler is filled in,
and then the wash-tank. Filling process may take up to a few minutes. As soon as
the wash-tank is filled in, the heating process of boiler starts. When the boiler is
heated up, the heating process of wash-tank starts.
Although it would be now possible to start the washing process, the manufacturer
does not recommend this, because the water inside the appliance has not reached
the optimum temperature yet. When the appliance reaches temperature ideal for
proper washing of dishes, it will be displayed in respective digital displays (J + K).
The appliance must reach proper temperatures: 82°C – 90°C in boiler, and 57°C –
62°C in tank, respectively.
110512
L
Washing cycle 1 (60 s) / draining
button
M
Washing cycle 2 (90 s) button
N
Washing cycle 3 (180 s) button
EN
17 / 32
Advertisement
Table of Contents
