Installing An Optional Ice Maker; Maintaining Your Refrigerator; Defrosting The Freezer; Changing The Interior Led Light - Insignia NS-RTM18BS8 User Manual

Installing an optional ice maker

The refrigerator comes set up for ice maker installation. This refrigerator is
compatible with the Insignia NS-IMK20WH7 ice maker.

Maintaining your refrigerator

Your refrigerator is designed for year-round use with only minimal cleaning and
maintenance.
When you first receive it, wipe the cabinet with a mild detergent and warm water,
then wipe dry with a dry cloth. Do this periodically to keep your refrigerator
looking new.
CAUTION:
To prevent damage to the finish, do not use:
• Gasoline, benzine, thinner, or other similar solvents.
• Abrasive cleaners.
Turn off the refrigerator and unplug it from the wall outlet.
1
Remove all food.
2
Wash the inside with a damp warm cloth soaked in a solution of one quart of
3
lukewarm water to two tablespoons of baking soda solution.
Be sure to keep the door gasket (seal) clean to keep the refrigerator running
4
efficiently.
Dry the interior and exterior with a soft cloth.
5

Defrosting the freezer

This refrigerator is frost free, so you don't need to defrost it. You just need to clean
it periodically, following the above instructions.

Changing the interior LED light

Using a Phillips screwdriver, remove the screw securing the lamp cover, then
1
remove the lamp cover.
Remove the LED light bulb from the lamp base, then install a new LED light
2
bulb.
Reinstall the lamp cover with the screw you previously removed.
3
16
NS-RTM18BS8/NS-RTM18WH7/NS-RTM18SS7/NS-RTM18BKR8/
Remove screw
www.insigniaproducts.com
NS-RTM18WH7-C/NS-RTM18SS7-C
LED light model: 50241001001C
Lamp base: E12
Input rating: 115V AC 3.5 W