Avaya Radvision Scopia Manual

H.323 and phone dialing guide

TryScopia H.323 and Phone Dialing Guide

H.323 Dialing

It's important to note that not all devices support all forms of H.323 dialing. You should have received a

meeting invite or email which includes the Meeting ID and PIN (if set by room owner) referenced

hereafter.

There are three dialing formats which can be used to connect to the TryScopia system from an H.323

device:

For this method, you simply dial one of the regional IP addresses you received in the email invite. Then

when prompted, enter the Meeting ID followed by the # symbol. If prompted for a PIN, enter the PIN

followed by the # symbol.

You can connect to a TryScopia meeting from a device that supports URI or TCS4 format dialing. Please

refer to the manufacturer and device manual for reference and information about URI dialing support

on your specific device.

If your device supports URI dialing, dial one of the following to connect to a TryScopia meeting;

replacing <MeetingID> with the actual Meeting ID you received:

 <MeetingID>@135.11.84.21 (or <MeetingID>@tryscopia.com)

APAC  <MeetingID>@135.10.194.79

EMEA  <MeetingID>@198.152.74.80

If your device supports TCS4 dialing, dial one of the following to connect to a TryScopia meeting;

replacing <MeetingID> with the actual Meeting ID you received:

US: 135.11.84.21##<MeetingID> (or tryscopia.com##<MeetingID>)

APAC: 135.10.194.79##<MeetingID>

EMEA: 198.152.74.80##<MeetingID>

Table of Contents

Do you have a question about the Radvision Scopia and is the answer not in the manual?

Page 1 TryScopia H.323 and Phone Dialing Guide H.323 Dialing It’s important to note that not all devices support all forms of H.323 dialing. You should have received a meeting invite or email which includes the Meeting ID and PIN (if set by room owner) referenced hereafter.
Page 2 3. Register your device to the TryScopia system… If you choose to or, or if other methods of connecting to a TryScopia meeting are unsuccessful, you can register your device directly to the TryScopia system. Once registered, you will be able to connect to calls by simply dialing the Meeting ID.
Page 3 2. Enter the + symbol followed by the 11 digit phone number in the Address field. (For example if you wanted to invite 1-603-666-6230, you would enter +16036666230) 3. After entering the number, press the invite button. ***For international calls dial +011 followed by the international number. TryScopia Support | ScopiaTrials@Avaya.com...