Vecow UMBC-1100 User Manual page 56

4.4.1.2 Graphics Configuration
Figure 4-4-1-2 : Graphics Settings
Skip Scaning of External Gfx Card
If Enable, it will not scan for External Gfx Card on PEG and PCH PCIE Ports.
Primary Display
Select which of IGFX/PEG/PCI Graphics device should be Primary Display Or
select SG for Switchable Gfx.
Internal graphics
Keep IGFX enabled based on the setup options.
GTT Size
Select the GTT Size.
Aperture Size
Select the Aperture Size.
Note : Above 4GB MMIO BIOS assignment is automatically enabled when
selecting 2048MB aperture. To use this feature, please disable CSM Support.
DVMT Pre-Allocated
Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the
Internal Graphics Device.
DVMT Total Gfx Mem
Select DVMT5.0 Total Graphic Memory size used by the Internal Graphics
Device.
©Vecow UMBC-1100 User Manual BIOS SETUP 49