Vecow UMBC-1100 User Manual page 49

4.3.7.1 Serial Port X Configuration
Figure 4-3-7-1 : Serial Port X Configuration
Serial Port 1 to port 5 Configuration
Options for Serial Port 1 to Serial Port 5.
Entering the corresponding Port option then end user can change the settings
such as I/O resource and UART mode (High Speed Serial Port is Port 1 only).
4.3.8 Hardware Monitor
Figure 4-3-8 : Hardware Monitor Settings
The IT8786 SIO features an enhanced hardware monitor providing thermal, fan
speed, and system voltages' status monitoring.
Smart Fan Support
Smart Fan Support. Work with Full Speed if "Smart Fan Support" is Disabled.
Smart Fan Mode
Default : Using the default smart fan table.
User : Setting parameters by user.
Start Temperature
Temperature Limit value of Fan Start (Degree C).
(Range : 10~80)
PWM Start Value (%)
Default PWM Value of Fan.
(Range : 15%~100%)
Full Speed Temperature
Temperature Limit value of Fan Full Speed (Degree C).
(Range : 50~90)
©Vecow UMBC-1100 User Manual BIOS SETUP 42