Vecow UMBC-1100 User Manual page 16

Pin No.
1
2
3
4
5
6
7
8
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/Link/Speed status of the connection.
The LED indicator on the right bottom corner lightens solid green when the cable
is properly connected to a 100Mbps Ethernet network and solid orange when the
cable is properly connected to a 1000Mbps Ethernet network. The left LED will
keep blinking off when Ethernet data packets are being transmitted/received.
LED Location LED Color
Right
Left
2.2.3 USB 3.1
There are 4 USB 3.1 Gen1 connections available supporting up to 5GB per
second data rate in the top side of UMBC-1100. They are also compliant with
the requirements of SuperSpeed (SS), high speed (HS), full speed (FS) and low
speed (LS).
©Vecow UMBC-1100 User Manual
10/100 Mbps
E_TX+
E_TX-
E_RX+
------
------
E_RX-
------
------
10Mbps
Green/
Off
Orange
Blinking
Yellow
Yellow
1000Mbps
MDI0_P
MDI0_N
MDI1_P
MDI2_P
MDI2_N
MDI1_N
MDI3_P
MDI3_N
100Mbps 1000Mbps
Solid Solid
Green Orange
Blinking Blinking
Yellow Yellow
GETTING TO KNOW YOUR UMBC-1100
8 1
9