Vecow UMBC-1100 User Manual page 47

4.3.2.2 GT – Power Management Control
Figure 4-3-2-2 : GT – Power Management Control
RC6 (Render Standby)
Check to enable render standby support.
Maximum GT frequency
Maximum GT frequency limited by the user. Choose between 350MHz (RPN)
and 1150MHz (RP0). Value beyond the range will be clopped to min/max
supported by SKU
Disable Turbo GT frequency
Check to enable render standby support.
4.3.3 PCH-FW Configuration
Figure 4-3-3 : PCH-FW Settings
ME State
Set ME to Soft temporarily disabled.
AMT BIOS Features
When disabled AMT BIOS Features are no longer supported and user is no
longer able to access MEBx Setup.
AMT Configuration
®
Configure Intel Active Management Technology Parameters.
ME Unconfig on RTC Clear State
Disabling this option will cause ME not to unconfigure on RTC clear.
©Vecow UMBC-1100 User Manual BIOS SETUP 40