Typical Ip Configuration With Vjc-7000-90 - Bosch MIC IP starlight 7000i Installation Manual

MIC IP starlight 7000i
12.3

Typical IP Configuration with VJC-7000-90

1
Figure 12.3: Basic configuration with VIDEOJET connect 7000
1 Ethernet (network) cable (Cat5e/Cat6 Shielded Twisted Pair (STP)) (user-supplied)
2 Data-only IP cable (Cat5e/Cat6 Shielded Twisted Pair (STP)) to the head-end network
3 Alarm input / output interface cables (user-supplied)
4 Alarm output cables (user-supplied)
5 120 / 230 VAC, 50/60 Hz
6 Audio input interface cable (user-supplied)
7 External washer pump (user-supplied)
8 Washer output, 2-conductor (user-supplied)
Note: The total length of Cat5e/Cat6 Shielded Twisted Pair (STP) cable must be less than 100
m (328 ft) between the camera and the head-end system.
Bosch Security Systems
1
between a Bosch camera and the port labeled PoE on VIDEOJET connect 7000
Note: The cable to the head-end also can be fiber optic cable from one of the two SFP
slots.
Cat5e/Cat6e = 100 m max.
Installation Manual
Typical System Configurations | en 51
2019-11 | 2.1 |