How To Fit The Hammock Facing Backwards; Brakes; Adjusting The Suspension; Swivel - JANE UNLIMIT Instructions Manual

5.- HOW TO FIT THE HAMMOCK FACING BACKWARDS

Simultaneously fit the openings on both sides of the ha-
mmock into the rear fasteners A2
Supporting the hammock in A2 lower the rear part of the
hammock until it fits into the two front fasteners A1
13a
Make sure that the hammock is securely fastened to the chas-
sis by gently pulling it upwards.

6.- BRAKES

Your pushchair has a brake system that works simultaneously
on both rear wheels. Use it as a parking brake whenever pos-
sible, it is an important safety element.
Press the brake lever to put the brake on.
Push the brake lever upwards to release the brake.
To adjust the brake:
If a more precise adjustment is necessary follow the instruc-
tions shown in figure 14.c
WARNING: When the rear brake is on make sure that the push-
chair has braked correctly, the word STOP should be completely
visible. 14 It may be necessary to gently push the pushchair for
the brake to be fully activated.
12 and 12a
13 and
14
14a
14b

7.- ADJUSTING THE SUSPENSION

The rear suspension has 2 settings, use a coin to adjust the
positions. 15
soft position .15a
hard position 15b

8.- SWIVEL

Your pushchair has front swivel wheels that can be steered,
or the steering can be locked if required.
To lock the steering press the button and when the wheels
are aligned with the longitudinal axle of the pushchair, they
will automatically lock. 16 Press the button in the opposite
direction to unlock the steering.

9.- REMOVING THE REAR WHEELS

To take the rear wheels off keep the button on the axle pres-
sed down and pull the wheel. 17
16a
31