Connecting And Disconnecting A - Volvo SENSUS Manual

AUDIO AND MEDIA

Connecting and disconnecting a

®
Bluetooth device*
The car is equipped with Bluetooth
wirelessly communicate with other Bluetooth
devices after registration and connection
(p. 50).
A maximum of ten Bluetooth
registered. Registration is performed once per
device. After registration the device no longer
needs to be activated as visible/searchable.
®
When the Bluetooth function is active and the
last device connected is in range it is connected
automatically to the car. When the car searches
for the last device connected its name is shown
in the display screen. To connect to another
device, press EXIT and select to change device
(p. 52).
®
When the Bluetooth device is out of range of
the car it is automatically disconnected. It is also
possible to manually disconnect (p. 52) a
device. To deregister a Bluetooth
the car, select Removing a Bluetooth
(p. 53). The car will then not locate the device
automatically.
It is possible to have two Bluetooth
nected simultaneously. One phone and one
media device, which it is possible to switch
between (p. 52). It is also possible to call with
the phone and simultaneously stream audio files.
50
Related information
Audio and media - operating the system
•
(p. 21)
®
and can
® Media Bluetooth
•
• Bluetooth
®
devices can be
®
device from
®
device*
®
devices con-
®
* (p. 49)
®
handsfree phone* (p. 53)
®
Registering a Bluetooth
It is possible to have two Bluetooth
connected simultaneously. One phone and one
media device, which it is possible to switch
between. It is also possible to call with the
phone and simultaneously stream audio files.
®
A maximum of ten Bluetooth devices can be
registered. Registration is performed once per
device. After registration the device no longer
needs to be activated as visible/searchable.
NOTE
If the phone's operating system is updated
then it is possible that the registration of the
phone is interrupted. In which case, discon-
nect the phone, see Removing a Bluetooth
device* (p. 53) and then reconnect it.
Connecting an external device takes place in dif-
ferent ways depending on whether or not the
device has been connected previously. The con-
nection options below presume that this is the
first time the device is being connected (regis-
tered) and that no other device is connected. The
connection options show the connection of a
phone. Connecting a media device (p. 49) is per-
formed in the same way, but starting from the
main source MEDIA.
There are two possible ways of connecting devi-
ces, either search for the external device from the
device*
®
devices
®
* Option/accessory.