Setting The Audio Volume For External - Volvo SENSUS Manual

AUDIO AND MEDIA
|| Pause
When the volume is reduced entirely or MUTE is
pressed, the media player is paused. When the
volume is increased or MUTE is pressed again,
the media player starts. It is also possible to
pause via the menu system 18
OK/MENU, selecting USB MENU
Play/Pause .
NOTE
A video film is only shown when the car is
stationary. When the car is moving at a speed
of over about 8 km/h no picture is shown and
No visual media available while driving
appears on the display screen, although the
audio is heard during this time. The picture is
shown again as soon as the car's speed falls
below about 6 km/h.
Related information
Connecting an external audio source via
•
AUX/USB* input (p. 46)
External audio source via AUX/USB* input
•
(p. 45)
Scan disc track or audio file (p. 41)
•
Random selection of disc track or audio file
•
(p. 42)
®
• DivX Video On Demand* (p. 43)
®
18 Does not apply to iPod
48
Picture settings* (p. 44)
•
by pressing
and then
Setting the audio volume for
external audio source
Set the volume for an external audio source
(p. 45). If the volume is too high or too low then
the quality of the sound may deteriorate.
If an external audio source (e.g. an MP3 player or
®
iPod ) is connected to the AUX input then the
audio source that is connected can have a differ-
ent volume than the audio system's internal vol-
ume (e.g. radio). Correct this by adjusting the vol-
ume of the input:
1. In the normal view for the media source,
press the MEDIA button and turn TUNE to
AUX and wait a few seconds or press OK/
MENU.
2. Press OK/MENU and then turn TUNE to
AUX input volume . Confirm with OK/
MENU.
3. Turn TUNE to adjust the volume for the AUX
input.
* Option/accessory.