Manual Radio Tuning - Volvo SENSUS Manual

AUDIO AND MEDIA
NOTE
The list only shows the frequencies of
•
stations that are currently being received,
not a complete list of all radio frequen-
cies on the selected wavelength.
If the signal from the currently received
•
station is weak, this may prevent the radio
from updating the station list. If this
occurs, press the INFO button (while the
station list is shown in the display screen)
in order to change to manual tuning and
set a frequency. If the station list is no
longer shown, turn TUNE one step in
either direction to show the list again, and
press INFO to switch.
The list disappears from the display screen after
a few seconds.
If the station list is no longer shown, turn TUNE
one step in either direction and press the INFO
button in the centre console to change to manual
tuning (p. 30) (or to return from manual tuning
to the function for Station list).
30

Manual radio tuning

The radio automatically compiles a radio station
list* (p. 29), but it is possible to perform radio
tuning manually.
The preset from the factory is that the radio
shows the station list of the strongest stations in
the area when you turn TUNE. When the radio
station list is shown, press the INFO button in the
centre console to change to manual tuning. This
allows you to select a frequency from the list of
all available radio frequencies in the selected
wavelength. In other words, if turn TUNE one
step in a manual search the frequency is
changed from e.g. 93.3 to 93.4 MHz, etc.
To manually select a station:
1. Press the RADIO button, turn TUNE until the
desired wavelength (e.g. FM1
press OK/MENU.
2. Turn TUNE to select a frequency.
NOTE
The preset from the factory is that the radio
automatically searches for the stations in the
area where you are driving (see section
"Radio station list").
But if you have changed over to manual tun-
ing (by pressing the INFO button in the cen-
tre console when the station list was shown),
then the radio remains set in the function for
manual tuning the next time you switch on
the radio. To change back to the function for
"Radio station list", turn TUNE one step (to
show the complete list of stations) and press
the button INFO.
Note that if you press INFO when the station
list is not shown then INFO is activated. For
more information on this function, see Audio
) is shown,
and media - operating the system (p. 21).
* Option/accessory.