Connecting An External Audio Source Via Aux/Usb* Input - Volvo SENSUS Manual

AUDIO AND MEDIA
|| USB memory
To facilitate the use of a USB memory stick, only
store music files on it. It takes a lot longer for the
system to load storage media that contains any-
thing other than compatible music files.
NOTE
The system supports mobile media compliant
with USB 2.0 and the FAT32 file system and
can handle 1000 folders with a maximum of
254 subfolders/files in every folder. The top
level, which can handle up to 1000 subfold-
ers/files, is an exception to this.
NOTE
When using a longer model USB memory
stick the use of a USB adapter cable is rec-
ommended. This is to avoid mechanical wear
to the USB input and the connected USB
memory stick.
USB hub
It is possible to connect a USB hub to the USB
connection and thereby connect multiple USB
devices simultaneously. USB device selection is
carried out in the normal view for the USB source
by pressing OK/MENU and then selecting
Select USB device.
46
MP3 player
Many MP3 players have their own file systems
that are not supported by the audio system. For
use in the system, an MP3 player must be set in
USB Removable device/Mass Storage
mode.
Device
®
iPod
®
An iPod is charged and supplied with power by
the USB connection via the player's connection
cable.
NOTE
The system only supports the playback of
®
audio files from iPod .
NOTE
®
When an iPod is used as audio source, the
car's infotainment system has a menu struc-
®
ture that is similar to the iPod
menu structure.
Related information
Audio and media - operating the system
•
(p. 21)
Playback and navigation of external audio
•
source* (p. 47)
Setting the audio volume for external audio
•
source (p. 48)
Connecting an external audio
source via AUX/USB* input
An external audio source, e.g. an iPod
player, can be connected to the audio system via
any of the connection points in the tunnel con-
sole.
Connection points for external audio sources.
To connect the audio source:
player's own
1. In the normal view for the media source,
press MEDIA, turn TUNE to the desired
audio source
OK/MENU.
> If USB is selected then
shown in the display screen.
2. Connect your audio source to one of the
connections in the tunnel console storage
compartment (see Connection points for
external audio sources(p. 46)).
®
or MP3
USB , iPod or AUX and press
Connect USB is
* Option/accessory.