Replacing The Fuses - Yamaha R15 YZF155 2018 Owner's Manual

Periodic maintenance and adjustment
To store the battery
1. If the vehicle will not be used for
more than one month, remove the
battery, fully charge it, and then
place it in a cool, dry place.
NOTICE: When removing the
battery, be sure to turn the main
switch off, then disconnect the
negative lead before discon-
necting the positive lead.
2. If the battery will be stored for
more than two months, check it at
least once a month and fully
charge it if necessary.
3. Fully charge the battery before in-
7 stallation. NOTICE: When install-
ing the battery, be sure to turn
the main switch off, then con-
nect the positive lead before
connecting the negative lead.
[ECA16842]
4. After installation, make sure that
the battery leads are properly con-
nected to the battery terminals.
NOTICE
Always keep the battery charged.
Storing a discharged battery can
cause permanent battery damage.

Replacing the fuses

3
[ECA16304]
1. Main fuse
2. Accessory fuse
3. Spare fuse
The fuse box is located under the rider
seat. (See page 4-16.)
If a fuse is blown, replace it as follows.
1. Turn the main switch off and turn
off the electrical circuit in ques-
tion.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperag e
ECA16531
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
7-30
EAU53044
Specified fuses:
Main fuse:
15.0 A
Accessory fuse:
2.0 A
1
3. Turn the main switch on and turn
2
on the electrical circuit in question
to check if the device operates.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
[EWA15132]