Removing And Installing The Cowling And Panels - Yamaha R15 YZF155 2018 Owner's Manual

Periodic maintenance and adjustment
Removing and installing the
cowling and panels
The cowling and panels shown need to
be removed to perform some of the
maintenance jobs described in this
chapter. Refer to this section each time
the cowling or a panel needs to be re-
moved and installed.
3 2
7
1. Panel A
2. Panel B
3. Panel C
4. Cowling A
Cowling A
To remove the cowling
1. Remove panels A, B and C. (See
page 7-7.)
2. Remove the bolts, quick fasteners
EAU18724
and screw, and then pull the cowl-
ing outward and take it off.
2
1
1. Cowling A
2. Bolt
3. Quick fastener
4. Screw
To install the cowling
4
1. Fit the projection on the cowling
into the hole, and then push the
cowling inward.
EAU80680
1
3
3
4
1. Cowling A
2. Projection
3. Hole
3
2. Install the screw, quick fasteners
3. Install panels A, B and C. (See
Panel A
To remove the panel
Remove the four quick fasteners and
one bolt for the panel, and then remove
the panel.
7-8
1
2
3
and bolts.
page 7-7.)
EAU80690