Table of Contents
Advertisement
Fig. 5
Fig. 6
2-2-3 Assemble the Eyepiece
1. Take down the cover of eyepiece tube .
2. Insert the eyepiece② into the eyepiece
tube, until touch the surface (see Fig. 5).
2-2-4 Connect the Power Cord
★ Don't use strong force when the power
cord is bended or twisted, otherwise it will
be damaged.
1. Make sure the power switch is at"0"(OFF)
before connecting.
2. Insert the connector① of power cord into
the power socket②, and make sure it connects
well (see Fig. 6).
3. Insert the other connector into the socket of
power supply, and make sure it connects well.
★ Use the special wire supplied by our
company. If it's lost or damaged, choose
one with the same specifications.
★ Wide voltage range is supported as
100~240V.
★ Connect the power cord appropriately
to make sure the instrument is connected
to ground.
- 5 -
MT-40 Series
①
Advertisement
Table of Contents
