Maintenance - Planet Networking & Communication ICA-3350P User Manual

3.5.15 Maintenance

You are able to upgrade firmware or reset this device to default setting on this page.
Reboot
Restart IP Camera
Automatically
Reset
Backup
Back up to SD Card
Device
Restore
Restore from SD
Click this button to reboot the IP camera. This function is useful when
you find IP camera is not working properly.
The device will reboot automatically according to the schedule. Please
make sure the Time setting is correct when this function is enable.
(1) Clear all settings of IP camera and reset to factory default setting.
(2) Reset all parameters, except for the IP, time zone, and daylight
saving parameters, to the original factory settings
Back up IP camera's setting and save it on your computer.
Back up IP camera's setting and save it on SD card.
Restore a previously-saved configuration file saved on your computer.
Click 'Browse' button to select the configuration file first and then click
'Restore' button to upload settings.
Please make sure you select the correct configuration file
before you restore settings. If you upload wrong file, the
device might be damaged.
Restore IP camera's configuration which is previously-saved on SD
58
3 Mega-pixel Remote Focus Bullet IR IP Camera
ICA-3350P