Danfoss APP Series User Manual page 56

Parts list
24. Tool sets
Danfoss A/S
High Pressure Pumps
DK-6430 Nordborg
Denmark
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice.
This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
26 38
APP 0.6-43 / APM 0.8-2.9 / APP W 5.1-10.2
Note:
The parts listed are not sold
separately, only in various kits.
521B0941 / DKCFN.PC.073.A13.02 / 10.2013 180R9267 / IOM APP 1.5-3.5 Appendices - v04 / 11.2013
Designation
Shaft bush
Press bush
Drift
Torx (T30)
Shaft bush (Ø18)
Press bush (Ø18)
Allen key (4 mm)
Allen key (5 mm)
Allen key (6 mm)
Shaft bush (Ø35)
Shaft seal extractor (Ø35)
Press bush (Ø35)
Adjustable pin wrench
Combination wrench (10 mm)
Combination wrench (13 mm)
Nut (M8x6.5x13)
Guide bolt (M8x140)
Shaft seal extractor (Ø45)
Press bush (Ø45)
Eye bolt (M8)
Press bush for valve plate
Stop for retainer plate
Screw (M8x20)
Screw (M8x70)
x
x
x
x
x x
x x
x
x
x x x x
x
x x
x x
x x x x
x x x x
x x x
x x x
x x
x x
x x
x x
x x
x
x x x
x x