Advertisement
Quick Links
Manual version: 6PW101-20141219
H3C S12500 LST1LB1A1 Card Manual
1 Card identifier
The card identifier LST1LB1A1 is at the upper right corner of the front panel.
2 Introduction
The LST1LB1A1 card provides one console port, one CF card interface, two USB interfaces, two
10/100/1000BASE-T Ethernet copper interfaces, and two Gigabit Combo interfaces.
You can use a GE port or combo interface to provide the following functions:
In-band management.
•
•
Outgoing interface for log messages.
•
Failover interface for stateful failover.
3 Specifications
Figure 1 Front panel
1: CF card button
3: CF card LED (CFS)
5: USB ports (hardware reserved, software not support)
6: 10/100/1000BASE-T management Ethernet ports (GE1 and GE2)
7: Management Ethernet port LEDs
8: 10/100/1000BASE-T copper combo ports (GE3 and GE4)
9: 1000BASE-X fiber combo ports (SFP3 and SFP4)
11: Ejector lever
Table 1 Card specifications
Item
CF card
Dimensions (H × W × D)
Power consumption
Weight
Specification
One CF card slot, 256MB by default for the external CF card
256 MB, 512 MB, or 1 GB for an optional external CF card
40.1mm X399.2mm X498.8mm(1.58 × 15.72 × 19.64 in)
94.5W~125.2W
4.3 kg (9.48 lb)
i
2: CF card slot (CF CARD)
4: Console port (CONSOLE)
10: Combo interface LEDs
12: Captive screw
BOM: 3123A0BY
Advertisement
Related Manuals for H3C S12500 LST1LB1A1
Summary of Contents for H3C S12500 LST1LB1A1
- Page 1 Manual version: 6PW101-20141219 BOM: 3123A0BY H3C S12500 LST1LB1A1 Card Manual 1 Card identifier The card identifier LST1LB1A1 is at the upper right corner of the front panel. 2 Introduction The LST1LB1A1 card provides one console port, one CF card interface, two USB interfaces, two 10/100/1000BASE-T Ethernet copper interfaces, and two Gigabit Combo interfaces.
- Page 2 Operating: 10% to 95%, noncondensing Ambient relative humidity • Non-operating: 5% to 95%, noncondensing Compatible device models H3C S12500 series switches System software version See the release notes that come with the card. Table 2 Console port specifications Item Specification...
- Page 3 Manual version: 6PW101-20141219 BOM: 3123A0BY Table 4 1000BASE-X fiber port specifications Item Specification Transceiver module Connector Interface standard 802.3, 802.3u, and 802.3ab Operating mode 1000 Mbps, full duplex Table 5 1000BASE-X SFP port specifications Maximum Central Gigabit SFP module Connector Cable specifications transmission wavelength...
-
Page 4: Installing The Card
Manual version: 6PW101-20141219 BOM: 3123A0BY 5 Installing and removing the card CAUTION: Wear a well-grounded ESD wrist strap or ESD gloves before you install or remove the card. • Do not touch the components on the PCB. • 5.1 Installing the card Remove the filler panel from the slot for the card at the front of the switch. -
Page 5: Software Upgrade
Log in through the card's Web interface, console port, Telnet, or SNMP. H3C recommends that you log in to the card from the switch's CLI the first time you access the card. This section includes a procedure for logging in from the switch's CLI. For more information about other login methods, see H3C SecBlade LB Module Configuration Guides.