RADtec PH Instruction Manual page 9

a
STEP 10: Put Rubber Ring (I) around the burner hole. Connect the 2 Glass Tubes (G) with Connector (H)
the whole glass tube assembly carefully. Insert the top end into the bottom hole of the Flame Screen as much as
possible. Keep the whole glass tube assembly vertical and sit it on the Rubber Ring
NOTE: GLASS TUBES ARE FRAGILE, HANDLE WITH GLASS TUBES CAREFULLY AND SLOWLY!
- 8 -
-
-
-
.-,,,,.,.
1
- a-
-
-
-
-
-
-
< --;
. Hold
(1).