Interrogation Of Channel Related Date Program - Siemens 5WG1 372-5EY01 Manual

9.3 Interrogation of Channel Related Date Program

Illustration 1: Menu selection and display of the free memory locations e.g. 304
Illustration 2: Select Channel e.g. C1, press button 1
Illustration 3: Select date program, press button Dat
Illustration 4: Begin interrogation e.g. from May Button 0, press 5
(interrogation from February Button 0, press 2 etc.)
Illustration 5: Search for the desired switching time press Enter Button
e.g. on 1.5 Channel C1 ist urned on at 7.30
Illustration 6: Example, memory searches for additional switching times
Select
Channel 1
Date From May
Interrogate
Interrogate
With Buttonv back into the automatic program (Auto)
9.4 Complete Interrogation of Date Program
The complete interrogation of the date program is effected as described in 9.3.
The entry step in illustration 4 (button 0,5) must be omitted in this case.
All stored date related switching times will be shown one after the other from
January (01).
9.5 Interrogating weekly program with priority
Fig. 1: Display of available memory space 210
Fig. 2: Select: Channel C1
Fig. 3: Only have priorities displayed
Fig. 4: Priority selection, have everything displayed with priority 2
Fig. 5: Press Enter to have further programs with priority 2 displayed
Selection
Select channel
interrogation
Search priority
Interrogate
Note: If, while in interrogation mode, a date, the year and the symbol
displayed, then this indicates a public holiday without a fixed date.
To cancel: Press button v to return to the automatic program.
51
Priority 2
are